Zone 1: This is the area directly above the bath or the shower tray to a height of 2.25m above the floor. A minimum of IP:4 (splash proof) is required for normal domestic use.
ZONE 2: This is the area over the bath tub or shower tray above zone1. This is the area external to zone1 and extends vertically 0.6m external to zone1 to a height of 2.25m. Protection required is the same as zone1.
ZONE 3: This is the area shown above zone 2 in the illustration above. This is the area external to zone 2 to a distance of 2.4m from zone 2 and a height above the floor of 2.25m. The protection required for normal domestic use is IP20. We recommend that you consult a qualified technician to ensure that all wiring and supply are protected in accordance with regulations before undertaking any work in a bathroom. The above does not apply to communal baths and showers where jets of water are used for cleaning purposes.
This white, energy efficient flush fitting is rated IP43 for ceiling and IP44 for wall mounting. Suitable for use in zone 1, 2 or 3 of a bathroom dependent on mounting position. Subject to current UK wiring regulations. Must be used in conjunction with R.C.D.
D (mm) 250 P (mm) 110 IP IP43/44 Wattage 1x13 Lamp holder PL Included
Flush fitting available in brass plate. Suitable for use in zone 3 of a bathroom. Subject to current UK wiring regulations. Must be used in conjunction with R.C.D.
D (mm) 300 P (mm) 85 Wattage 1x38 Lamp holder 2D (not included)
Flush fitting available in chrome. Suitable for use in zone 3 of a bathroom. Subject to current UK wiring regulations. Must be used in conjunction with R.C.D.
D (mm) 300 P (mm) 85 Wattage 1x38 Lamp holder 2D (not included)
Flush fitting available in white. Suitable for use in zone 3 of a bathroom. Subject to current UK wiring regulations. Must be used in conjunction with R.C.D.
D (mm) 300 P (mm) 85 Wattage 1x38 Lamp holder 2D (not included)
The opal glass, energy efficient flush fitting is rated IP43 for ceiling and IP44 for wall mounting. Suitable for use in zone 3 of a bathroom. Subject to current UK wiring regulations. Must be used in conjunction with R.C.D.
D (mm) 260 P (mm) 110 IP IP43/44 Wattage 1x13 Lamp holder PL Included
The flush fitting has a satin chrome plate over the glass, perforated to allow light to shine through. Suitable for use in zone 3 of a bathroom. Subject to current UK wiring regulations. Must be used in conjunction with R.C.D.
D (mm) 350 P (mm) 65 H (mm) 350 Wattage 1x100 Lamp holder R7s Included
Flush fittings available in satin brass. Suitable for use in zone 3 of a bathroom. Subject to current UK wiring regulations. Must be used in conjunction with R.C.D.
D (mm) 300 P (mm) 110 Wattage 2x7 Lamp holder PL Included
Flush fittings available in satin chrome. Suitable for use in zone 3 of a bathroom. Subject to current UK wiring regulations. Must be used in conjunction with R.C.D.
D (mm) 300 P (mm) 110 Wattage 2x7 Lamp holder PL Included
Modern glass wall bracket with rocker switches. Suitable for use in zone 3 of a bathroom. Subject to current UK wiring regulations. Must be used in conjunction with R.C.D.
D (mm) 400 P (mm) 80 H (mm) 120 Wattage 2x40 Lamp holder SES (not included)
This satin chrome, energy efficient flush fitting is rated IP43 for ceiling and IP44 for wall mounting. Suitable for use in zone 1, 2 or 3 of a bathroom dependent on mounting position. Subject to current UK wiring regulations. Must be used in conjunction with R.C.D.
D (mm) 250 P (mm) 110 IP IP43/44 Wattage 1x13 Lamp holder PL Included
This satin brass, energy efficient flush fitting is rated IP43 for ceiling and IP44 for wall mounting. Suitable for use in zone 1, 2 or 3 of a bathroom dependent on mounting position. Subject to current UK wiring regulations. Must be used in conjunction with R.C.D.
D (mm) 250 P (mm) 110 IP IP43/44 Wattage 1x13 Lamp holder PL Included
Modern bathroom flush fitting in brushed steel. Suitable for use in zone 1 of a bathroom. Subject to current UK wiring regulations. Must be used in conjunction with R.C.D.
D (mm) 200 P (mm) 45 IP IP54 Wattage 1x40 Lamp holder G9 Included
Modern bathroom IP44 flush ceiling fitting. Suitable for use in zone 1 of a bathroom. Subject to current UK wiring regulations. Must be used in conjunction with R.C.D.
D (mm) 280 P (mm) 70 IP IP44 Wattage 3x25 Lamp holder G9 Included